Heavy Double Side Plywood Calibrating Machine From Minghung Machinery
Plywood sanding is to use the sanding process to meet the error range of the process requirements for different thicknesses of the plywood after hot pressing by the hot press, and then use a fine abrasive belt to fine sand or polish the plywood to improve the surface finish of the plywood.
The hot-pressed plywood is composed of multiple layers of veneers. There may be deviations in the thickness of each layer of veneer. It may happen that the veneers that make up the slab are all positive tolerances, or the veneers that make up a board are all negative tolerances. After pressing, the thickness of the two sheets of plywood is very different. The key technology of the thickness-fixed sanding machine is to sand the two sides with equal thickness. It is easier to operate with a double-sided sanding machine, and it is easier to use a single-sided sanding machine to make both sides of the plywood, etc. Thickness is more difficult.
Whatsapp: +8618769900191 +8615589105786 +8615805493072
Email: minghungmachinery@gmail.com
Website: www.plywoodmachineline.com
Dear friends, for save your precious time, please tell me your conditions and requires, i will offer you the most suitable plywood machine for you.
Sanding machine is the last step for producing plywood, according to different requires, like calibrating thickness accurate and balance, or polishing the surface of plywood are smooth and bright, sanding machine will be different.
Sanding machine has 1 head, 2 heads, 3 heads, light weight and heavy duty, single side and double sides, and different structures.
The function of sanding machine, decides it should be more precise, and our factory has many years experience, advanced technology and speicial produce technique, so we can make sure sanding machine quality good and accurate.
Therefore, please tell us your demands, we will offer the most suitable machine for you.
>>>Parameters:
| product name | sanding machine |
| working width | ≤1300mm /customize like 2000mm |
| working length | ≥700mm |
| working thickness | 5-100mm |
| abrasive belt size | 2620*1330mm |
| speed of dust-collector | 0.6m³/min |
| speed of dust-collector | 25-30m/s |
| volume of dust collector | 12000m³/h |
| weight | 11000kg |
Delivery >>:
