Basic composition of plywood sander
The machine tool mainly consists of the following parts:
(1). Machine body: responsible for the connection of sanding head, feeding device, lifting device and other machine tool components.
(2). Lifting hand wheel: used for fine-tuning the lifting of the feeding table.
(3). Various power mechanisms: provide the power required by the sanding head, feeding device, lifting device, and brushing device.
(4). Lifting device: The cycloidal pin wheel reducer drives the lead screw in the worm gear reducer to lift up and down through the chain drive, thus completing the lifting of the feeding table supported on the top of the lead screw.
(5). The conveyor bed is composed of driving rollers, driven rollers, support rollers and bed body. The 4Kw reducer adopts frequency conversion speed regulation, and its feeding speed is 6~35m/min.
(6). Upper feeding roller: there are five in total, all of which are driven feeding rollers, which mainly play the role of pressing material. Their position and pressing force directly affect the sanding quality of the workpiece, and must be carefully adjusted.
(7). Brushing roller: used to remove the dust bonded on the surface of the workpiece.
(8). Electrical control box: the electrical components of the machine are assembled in it. Please refer to the attached drawing for the electrical schematic diagram.
whatsapp: +8618769900191 +8615589105786 +8615805493072
website: www.plywoodmachineline.com
email: minghungmachinery@gmail.com
Sanding machine is the last step for producing plywood, for make plywood thickness more accurate and balance, surface more smooth and bright, we have different types, for example, there has 1 head, 2 heads, 3 heads, single side, double sides, light weight and heavy duty, some wants calibrating the thickness very accurate, some wants keep the surface very smooth, so we will offer you the most suitable sanding machine. This is sanding machine with 2 heads:
Max Sanding board width | 40-1300mm |
Sanding board thickness | 2.5-80mm |
Sanding board length | >780mm |
Abrasive belt speed | 25m/min |
Abrasive belt size | 1300*2620mm |
Voltage | 380v |
Frequency | 50hz |
Main motors power | 55kw; 45kw |
Convey feeding motor power | 7.5kw |
Feeding speed | 20-40m/min |
Lifting motor | 0.75kw |
Brushing motor | 0.75kw |
Total power | 109kw |
Working pressure of compress air | 0.6mpa |
The capacity of dust collection | 15000m³/h |
size | 3100*2900*2440mm |
Weight | 8100kg |
Note: if your plywood size is special, like the width is 1500mm, 1700mm or more, please tell me, we can customize sanding machine. ADVANTAGES:
FACTORY: 
>Machine we produce:
wood debarker, veneer peeling machine, veneer stacker, knife grinder, veneer dryer machine, glue spreader,
plywood veneer lay-out machine, core composer, plywood cold press machine, plywood hot press machine,
plywood DD saw, sanding machine, lift table.
>Principle:
through many years improvment and development, we have had our own company value, that is offer good and suitable plywood machine to every our client forever, and help their business create much value.
Because we know this, so we insist make our machine well, from the beginning, choose machine material and spare parts, our experienced purchasing manager choose the better one through company different, then our designer will discuss and design machine, then our professional workers will start produce machine, each production step will be responsible by different workers.
the whole production line will be tested at least 5 times to make sure our machine in good conditions.
>Certification:
All our plywood machine have CE, and test report. FACTORY EXISTING SPARE PARTS: 
whatever our sanding machine, or other plywood machinery, we all choose the good one, and after our designer finish the drawings, our workers will seriously and responsible treat each production step, different production steps will be responsible by different professional and experienced workers, make sure our machine quality is very good and stable. CLIENTS:

With our clients, we are not just partners, we are friends.
So, we will always think of the problem standing on your position, think how to help you save cost and create benefits.
We welcome you come to visit our factory and check machine by yourself, and produce machine according to your needs. DELIVERY: 



Before loading, we will test machine and send you videos.
When loading, we will share loading pictures with you.
After ship leave, we will offer container and ship information to you, and prepare all documents for your custom clearance.
RELATED MACHINE:



RFQ:

CONTACTS:
whatsapp: +8618769900191 +8615589105786 +8615805493072
website: www.plywoodmachineline.com
email: minghungmachinery@gmail.com