minghungmachinery@gmail.com   ▏           +8618769900191 / +8615589105786
Types of Veneer Dryer
You are here: Home » Veneer Drying Series » Veneer Roller Dryer » Types of Veneer Dryer

PRODUCT CATEGORY

Types of Veneer Dryer

Veneer Dryer
Veneer drying is very important for the production of plywood. After the wood is processed into a veneer by a veneer lathe, the moisture content is 50-70%. Plywood production requires a veneer moisture content of 8-%14. If the moisture content of the veneer is greater than %14, the negative effects are: 1. It will increase the hot pressing time of the plywood blank in the hot press. The heating of the hot press is heated by a steam boiler or a heat conduction oil boiler. If you increase the hot pressing time, it is equivalent to increasing the heat loss. 2. If the moisture content is higher than %14, the veneer after gluing will ooze glue during the hot pressing process, causing the plywood to crack. 3. If the moisture content of the veneer is 14%, the plywood blank needs to be dehumidified several times during the hot pressing process to remove the moisture inside the plywood blank. If the temperature is not properly controlled, air bubbles will appear in the semi-finished plywood, which will cause cracks and cause the plywood to be scrapped.
Minghong veneer drying effectively solves the problem of veneer drying, veneer drying, according to the density of different veneers, different veneer output of customers, procurement costs and other factors, MINGHUNG has developed a variety of veneer drying models MH-RD, MH-RD2830L, MH-RD304HL: drum veneer drying, wire veneer drying, mesh veneer drying, press drying, square tube veneer drying, hollow veneer drying, etc. Professional research on veneer drying and energy saving , energy saving, and improve production efficiency.
Whatsapp: +8618769900191 +8615589105786 +8615805493072
Email: minghungmachinery@gmail.com
Availability:
Quantity:
sharethis sharing button
  • MH-RD40L

  • MINGHUNG

  • Qingdao, China

  • L/C, T/T

  • two years

            Types of veneer dryer 

Veneer Dryer

Veneer drying is very important for the production of plywood. After the wood is processed into a veneer by a veneer lathe, the moisture content is 50-70%. Plywood production requires a veneer moisture content of 8-%14. If the moisture content of the veneer is greater than %14, the negative effects are: 1. It will increase the hot pressing time of the plywood blank in the hot press. The heating of the hot press is heated by a steam boiler or a heat conduction oil boiler. If you increase the hot pressing time, it is equivalent to increasing the heat loss. 2. If the moisture content is higher than %14, the veneer after gluing will ooze glue during the hot pressing process, causing the plywood to crack. 3. If the moisture content of the veneer is 14%, the plywood blank needs to be dehumidified several times during the hot pressing process to remove the moisture inside the plywood blank. If the temperature is not properly controlled, air bubbles will appear in the semi-finished plywood, which will cause cracks and cause the plywood to be scrapped.

Minghong veneer drying effectively solves the problem of veneer drying, veneer drying, according to the density of different veneers, different veneer output of customers, procurement costs and other factors, MINGHUNG has developed a variety of veneer drying models MH-RD, MH-RD2830L, MH-RD304HL: drum veneer drying, wire veneer drying, mesh veneer drying, press drying, square tube veneer drying, hollow veneer drying, etc. Professional research on veneer drying and energy saving , energy saving, and improve production efficiency.

Whatsapp: +8618769900191  +8615589105786   +8615805493072

Email: minghungmachinery@gmail.com

During the veneer drying process, a large amount of steam will be generated inside the dryer. If the steam cannot be discharged in time, it will affect the veneer drying efficiency and reduce the output of veneer drying.


MINGHUNG patented automatic control veneer drying moisture removal system, the whole The machine is controlled by computer PLC. According to the water vapor generated in the drying process of different veneers, automatic detection and automatic moisture removal are carried out.

There are a variety of sensing devices inside the veneer dryer, which convert the detection data into computer signals, and convert the computer signals into PLC signals. control.

The advantage of this design is precise moisture removal, automatic processing according to the dry humidity inside the veneer dryer, and avoiding the loss of energy inside the veneer dryer. Energy is saved and thermal efficiency is improved.

veneer mesh dryer machine wire veneer dryer veneer drying MINGHUNG

 
 
Beech veneer is light yellow, with clear texture and uniform texture. The density of beech is generally about 790kg/m³, and the hardness is about 5800N. The rear beech veneer has a smoother surface. Because it is cooking, the moisture content reaches %50-%60, and the moisture content is relatively high. If the moisture content of the veneer after drying reaches %0-%14, it takes about 10 minutes, so if the output of beech veneer drying is If there are requirements, special optimization of the dryer is required. MINGHUNG MH-RD2830L; MH-RD304HL These two models are veneer drying equipment optimized for beech veneer. For details, please contact us.

Veneer drying is very important for the production of plywood. After wood is produced into veneer through veneer lathe, the moisture content is 50-70%. Plywood production requires veneer moisture content of 8-%14. The moisture content of veneer is greater than %14, which brings negative The influences are:

1. It will increase the hot pressing time of the plywood blank in the hot press. The heating of the hot press is heated by a steam boiler or a heat transfer oil boiler. If the hot pressing time is increased, it is equivalent to an increase in heat loss.

2. If the moisture content is higher than %14, the veneer after glue spreading will seep out of glue during the hot pressing process, causing the plywood to crack.

3. If the moisture content of the veneer is 14%, the plywood blank needs to be dehumidified several times during the hot pressing process to remove the moisture inside the plywood blank. If the temperature is not properly controlled, there will be air bubbles in the semi-finished plywood, which will crack and cause the plywood to be scrapped.



MINGHUNG veneer drying effectively solves the problem of veneer drier, veneer drying, according to the density of different veneers, the customer's different veneer output, the factors of purchasing cost, MINGHUNG has developed a variety of veneer drying types MH-RD40L,MH-RD304HL / MH-2830L / MH-MD3618  : roller veneer dryer, wire veneer dryer, mesh veneer drier, press drying, square tube veneer drying, Hollow veneer drier, ect specialized in research on saving energy, energy consumption and improving production efficiency of veneer drying.


MINGHUNG veneer dryerveneer dryer machineveneer sheets dryerveneer roller dryerMINGHUNG veneer dryer machineplywood veneer dryer

Veneer drying is a very important link in the production process of plywood. The moisture content of veneer is too high, or the moisture content of veneer is uneven, which directly affects the production quality of plywood. Usually, the moisture content of veneer is required to be %8-%14 , the moisture content of the veneer in this interval is the most reasonable for the quality of the plywood veneer, so a veneer dryer is required to complete the veneer drying. The selection of the veneer dryer needs to provide us with several data to ensure that we provide the best solution:

1. What is the thickness of the veneer?

2. What is the throughput for 10 hours?

3. What is the moisture content of the veneer?

4. The name of the tree for the veneer?

5. Is the heating boiler heat transfer oil or steam? Etc.,
MINGHUNG MH-304HL model dryer, providing energy-saving and efficient veneer drying solutions.

Types of Veneer Dryer

Types of Veneer Dryer

Types of Veneer Dryer

Types of Veneer Dryer

Types of Veneer Dryer


Veneer drying parts:
FAN:
We have professionally designed according to different types of dryers, positive pressure fans and negative pressure fans, different fans for different veneer drying equipment, energy-saving, high-efficiency design concepts provide an effective guarantee for improving the quality of veneer drying products .

Types of Veneer Dryer

Types of Veneer Dryer

Types of Veneer Dryer

Types of Veneer Dryer


MESH AND ROLLER:

Types of Veneer Dryer

Types of Veneer Dryer

Types of Veneer Dryer

Types of Veneer Dryer

HEAT CONDUCTION HEAT SINK:

Heat conduction heat sink, used for MINGHUNG veneer drying, the warp is made of aluminum, the characteristics of aluminum material is good heat conduction effect, low heat loss, can better improve heat conduction efficiency, internal design forced circulation, heat conduction effect is better than traditional heat dissipation Warp increased by %70. Greatly improved energy utilization.

Types of Veneer Dryer


Delivery:

Types of Veneer Dryer

Types of Veneer Dryer

Types of Veneer Dryer

Types of Veneer Dryer

Types of Veneer Dryer

Types of Veneer Dryer

Previous: 
Next: 
Product Inquiry
auto plywood machine.jpg
The Ultimate Guide to Plywood Hot Press Machines: Crafting High-Quality Plywood
12-13 2023

The Ultimate Guide to Plywood Hot Press Machines: Crafting High-Quality Plywood Introduction:Plywood is a versatile and widely used material in various industries, from construction to furniture manufacturing. Behind the scenes, plywood hot press machines play a crucial role in the production proces

Read More
MINGHUNG core veneer dryer.jpg
Advantages of veneer dryer ?
08-13 2022

What is a veneer dryer?MINGHUNG Roller veneer dryer for drying original wood veneer, remove abundant humidity, in the end, the wood veneer humidity will be 5%-10%, so it is suitable for making plywood.Veneer roller dryer are suitable for big drying capacity per day, it can be different length, width

Read More
MINGHUNG MCHINERY.jpg
SHANDONG MINGHUNG WOOD MACHINERY FACTORY
08-05 2020

Shandong Minghung Wood Machinery Factory Shandong minghung wood machine factory produces plywood machinery in linyi city city, china, dedicated to providing high-quality and suitable machines veneer machine,plywood machine,veneer splicing machine.veneer dryer machine,veneer peeling machine,plywood v

Read More
plywood production line.jpg
plywood hot pressing process
05-27 2023

Whatsapp: +8618769900191 +8615589105786 +8615805493072Email: minghungmachinery@gmail.comWebsite: www.plywoodmachineline.com

Read More
auto loader for hot press machine.jpg
Automatic /Auto Loader And Unloader for Plywood Hot Press Machine From China SHANDONG MINGHUNG MACHINE
03-23 2024

Automatic /Auto Loader And Unloader for Plywood Hot Press Machine From China SHANDONG MINGHUNG MACHINEMINGHUNG Auto hot press machineIntroduction:The plywood manufacturing industry has witnessed significant advancements in recent years, with automation playing a crucial role in improving efficiency

Read More
veneer peeling line.jpg
China MINGHUNG Rotary Wood Veneer Lathe
03-09 2024

Rotary Wood Veneer LatheRotary cutting machines are used to process wood sections of a certain length and diameter into continuous veneer strips for the production of plywood, fine wood top boards and other artificial board veneers. The main technical parameters of the rotary cutting machine are the

Read More
Veneer dryer machine made in china.jpg
Veneer Machine Dryer
03-02 2024

veneer machine dryer

Read More
kurutma makinesi.jpg
Veneer Dryers
03-02 2024

Veneer DryersThe Inner Workings of Veneer Drying Machines: Unveiling the Art of Veneer DryingIntroduction:Veneer, a thin slice of wood used for various applications, undergoes a crucial drying process to enhance its stability and durability. Veneer drying machines play a pivotal role in this process

Read More
China veneer dryer.jpg
The Best Wood Veneer Dryer Supplier in China
03-02 2024

The Best Wood Veneer Dryer Supplier in ChinaWelcome to China MINGHUNG machine channel, in here, you will see the most advanced veneer dryer technology in China.Before I introduce our veneer dryer to you, we should know first what is the veneer dryer? i think many people are very familiar about it, e

Read More
Chinês Torno laminador.jpg
Chinês Torno laminador para lâminas/ Chinese Roller Lathe
12-17 2022

Chinês Torno laminador para lâminas/ Chinese Roller Lathe, Somos fabricantes chineses de máquinas para compensado e laminadores, para nosso torno laminador, primeiro escolhemos usar materiais bons e grossos, para que nossos tornos sejam fortes e pesados;

Read More
Shandong MINGHUNG Wood Machinery Co.,Ltd is one famous manufacturer of plywood machine in China, located in Linyi city. 
Home

PRODUCT GROUPS

CONTACT US

 +86-18769900191 /  +86-15589105786 
 +86-18769900191 / +86-15589105786
 
minghungmachinery@gmail.com
  Fangcheng Town,Lanshan District,Linyi City,Shandong Province,China
Copyright © 2010 SHANDONG MINGHUNG WOOD MACHINERY CO.,LTD