minghungmachinery@gmail.com   ▏ +86-18769900191 / +86-15589105786
Pallet Truck
You are here: Home » Product Groups » Plywood Auxiliary Machine » Forklift » Pallet Truck

PRODUCT CATEGORY

Pallet Truck

That is, logistics handling equipment that plays the role of handling goods. The battery is used as the power source, the motor is used as the power, and the vehicle is driven by gear transmission. The lifting of the fork is driven by the DC motor and hydraulic transmission, which pushes the oil cylinder to move up and down to lift the fork and the goods. Because the walking and lifting of the car are all electric, the driving mode is standing driving, and the steering operation is rudder steering, so it has the advantages of labor saving, high efficiency, stable cargo running, simple operation, safety and reliability, low noise, no pollution, etc. The car uses a 24-volt large-capacity battery, which greatly prolongs the use time after a single charge.
Availability:
Quantity:

electric truck (1)That is, logistics handling equipment that plays the role of handling goods. The battery is used as the power source, the motor is used as the power, and the vehicle is driven by gear transmission. The lifting of the fork is driven by the DC motor and hydraulic transmission, which pushes the oil cylinder to move up and down to lift the fork and the goods. Because the walking and lifting of the car are all electric, the driving mode is standing driving, and the steering operation is rudder steering, so it has the advantages of labor saving, high efficiency, stable cargo running, simple operation, safety and reliability, low noise, no pollution, etc. The car uses a 24-volt large-capacity battery, which greatly prolongs the use time after a single charge.

truck definition

When the manual pallet truck is in use, the fork it carries is inserted into the pallet hole, and the hydraulic system is driven by the ability to realize the lifting and lowering of the palletized goods, and the handling operation is completed by pulling by manpower. It is the easiest, most effective and most common loading and unloading and handling tool among pallet transport tools.

Commonly used trucks

An automated guided vehicle (AGV) is an industrial application that does not require a driver and uses a rechargeable battery as its power source. Generally, its travel route and behavior can be controlled by a computer, or its travel route can be set up by using an electromagnetic path-following system. The electromagnetic path-following system is attached to the floor, and the unmanned truck follows the electromagnetic path-following system. Messages move and act.

In addition, there are also such as: hydraulic support trucks (divided into integrated vehicles and split vehicles, split vehicles are also known as trailer hydraulic support trucks)

Hydraulic support truck: mining equipment, a special handling tool specially designed and manufactured for mining hydraulic support, mining and other large-scale machinery that is difficult to handle. Using it not only improves labor efficiency, but also realizes safe handling, especially on the working face. And when the mining face is moved, it reflects the characteristics of its economy and convenience.

Truck classification

The truck is also called a pallet truck, which is mainly divided into

Manual trucks: manual hydraulic trucks, high-lift scissor trucks, electronic scale trucks, manual pallet trucks, etc.

Semi-electric trucks: semi-electric trucks, semi-electric pallet trucks, etc.

All-electric trucks: all-electric trucks, all-electric pallet trucks, electric pallet trucks, etc.

Both manual pallet trucks and electric pallet trucks are tools used for flat point-to-point handling. The small and flexible size makes the manual pallet truck suitable for almost any occasion. However, due to manual operation, it is more difficult to carry heavier items of about 2 tons, so it is usually used for frequent short-distance operations of about 15 meters, especially in the loading and unloading areas. In the future logistics links, manual pallet trucks will also assume the role of connection between various transportation links. Each truck or truck is equipped with a manual pallet truck, which will make loading and unloading operations faster and more convenient. Limited by venue. When the plane handling distance is about 30 meters, the driving speed is controlled by the stepless speed change switch on the handle, following the speed of the operator's walking speed, which not only reduces the fatigue of the personnel, but also ensures the safety of the operation. For example, when the distance of the main handling route is more than 30 meters to about 70 meters, an electric pallet truck with folding pedals can be used, and the driver can stand to drive, and the maximum speed can be increased by nearly 60%.

Further detailed differentiation: simple trucks, quick-lift trucks, manual trucks, heavy-duty trucks, economical manual trucks, galvanized trucks, ultra-low-level trucks, stainless steel trucks, weighing trucks, Paper tube trucks, mountain trucks, elevated trucks, etc.

The maintenance points of the transmission system of the all-electric truck are as follows:

1. Gearbox: The gear box of the transmission system of the all-electric truck is the key point of maintenance. The cleaning of the gear box must be meticulous and comprehensive, and finally the gear oil must be replaced.

2. Bearings: Clean and replace the transmission bearings of electric trucks, and add new lubricating oil after replacement!

3. Check and adjust the brake system, and add lubricating oil to each active system!

4. Check the automatic wave box system and replace the automatic wave box and filter!

5. Check the wheels of the all-electric truck and fasten the bolts.

Related Introduction Edit Broadcast

How to choose a truck

Cargo handling can be divided into horizontal handling and vertical handling. With its compact body, flexible use, convenience and environmental protection, the truck has become an essential tool for horizontal handling of materials. Generally speaking, trucks can be divided into manual hydraulic trucks, semi-electric trucks and fully electric trucks.

All electric truck

The principle of lifting and lowering the goods of the all-electric pallet truck is the same as that of the semi-electric pallet truck. The difference is that all operations of the all-electric pallet truck use an electric control system, which does not require manual operation. It is a relatively time-saving and labor-saving handling tool.

Trucks are widely used in logistics, warehouses, shopping malls, workshops, schools, airports, etc. Starting from the handle, the truck is designed to meet the ergonomic handle and meet the load requirements of 1-5 tons. The fork design is combined with the European and American pallet standards, and the casters such as polyurethane, nylon and rubber are used to meet the requirements of various environments for handling tools. The beetle design of the fork reduces the wear and tear of the handling tools on the goods during handling.

Distinguish manual editing broadcast

The difference between an all-electric pallet truck and a manual hydraulic pallet truck:

The first is the difference between the power system: manual hydraulic trucks rely on manual lifting to transport goods, and all-electric trucks, as the name suggests, rely on motor power to carry overweight;

Secondly, the driving technical requirements are different: the manual hydraulic truck can basically be operated by ordinary employees. All electric trucks must be equipped with professional drivers;

Again, the difference between performance and price: all-electric trucks have high performance, flexible operation and fast handling. The price of all-electric trucks is much higher than that of manual hydraulic trucks.

Product Features Edit Broadcast

Product features of electric trucks:

1. The electric hydraulic pump is used to lift and lower, and the electric control (chopper) or the domestic resistance electric control is used to adjust the driving speed.

2. There are various specifications with and without pedals.

3. There are two types of installation methods: vertical motor and horizontal motor.

4. Compared with imported electric trucks, domestic electric trucks generally do not have a steering assist system installed. Most of the imported electric trucks have been installed with power steering systems.

5. Electric trucks are suitable for heavy-duty and long-term cargo transfer, which can greatly improve the efficiency of cargo handling.

6. This machine is designed for ultra-thin body, infinitely variable speed, ultra-small turning radius, strong body, light and flexible action, no noise, no pollution, long working time on one charge, reliable performance, widely used in logistics, warehouses, factories , hospitals, schools, shopping malls, airports, stadiums, stations and airports, etc.

Notes Edit Broadcast

a. The altitude does not exceed 1000 meters;

b. The ambient air temperature shall not exceed +40°C and shall not be lower than -25°C;

c. When the ambient temperature is +40°C, the relative humidity does not exceed 50%, and when the temperature is lower, a larger relative humidity is allowed;

d. Hard, flat ground.

e. It is forbidden to use the vehicle in corrosive environments such as flammable, explosive or acid-base. [1]


Previous: 
Next: 
Shandong MINGHUNG Wood Machinery Co.,Ltd is one famous manufacturer of plywood machine in China, located in Linyi city. 

Home

CONTACT US

 +86-18769900191 /  +86-15589105786 
 +86-18769900191 / +86-15589105786
 
minghungmachinery@gmail.com
  Fangcheng Town,Lanshan District,Linyi City,Shandong Province,China
Copyright © 2010 SHANDONG MINGHUNG WOOD MACHINERY CO.,LTD