Plywood sanding is to use the sanding process to meet the error range of the process requirements for different thicknesses of the plywood after hot pressing by the hot press, and then use a fine abrasive belt to fine sand or polish the plywood to improve the surface finish of the plywood.
The hot-pressed plywood is composed of multiple layers of veneers. There may be deviations in the thickness of each layer of veneer. It may happen that the veneers that make up the slab are all positive tolerances, or the veneers that make up a board are all negative tolerances. After pressing, the thickness of the two sheets of plywood is very different. The key technology of the thickness-fixed sanding machine is to sand the two sides with equal thickness. It is easier to operate with a double-sided sanding machine, and it is easier to use a single-sided sanding machine to make both sides of the plywood, etc. Thickness is more difficult.
Whatsapp: +8618769900191 +8615589105786 +8615805493072
Email: minghungmachinery@gmail.com
Website: www.plywoodmachineline.com
The Instruction of Sanding Machine: Sanding machine is the last step for producing plywood, for make plywood thickness more accurate and balance, surface more smooth and bright, we have different types, for example, there has 1 head, 2 heads, 3 heads, single side, double sides, light weight and heavy duty, some wants calibrating the thickness very accurate, some wants keep the surface very smooth, so we will offer you the most suitable sanding machine. This is Double sides calibrating machine: 
Max Sanding board width | 40-1300mm | 40-1300mm |
Sanding board thickness | 5-150mm | 5-150mm |
Sanding board length | >500mm | >700mm |
Abrasive belt speed | 25m/min | 25m/min |
Abrasive belt size | 1350*2800mm | 1350*2800mm |
Voltage | 380v | 380v |
Frequency | 50hz | 50hz |
Main motors power | 75kw; 75kw | 75kw; 75kw |
Convey feeding motor power | 11kw | 11kw |
Feeding speed | 10-30m/min | 10-30m/min |
Lifting motor | 0.75kw | 0.75kw |
Brushing motor | 0.75kw | 0.75kw*2 |
Total power | 162.49kw | 163.25kw |
Working pressure of compress air | 0.6mpa | 0.6mpa |
The capacity of dust collection | 24000m³/h | 24000m³/h |
size | 2100*3100*3050mm | 2200*3100*3050mm |
Weight | 10000kg | 14500kg |
Note: if your plywood size is special, like the width is 1500mm, 1700mm or more, please tell me, we can customize sanding machine. FACTORY:
>Machine we produce:
wood debarker, veneer peeling machine, veneer stacker, knife grinder, veneer dryer machine, glue spreader,
plywood veneer lay-out machine, core composer, plywood cold press machine, plywood hot press machine,
plywood DD saw, sanding machine, lift table.
>Principle:
through many years improvment and development, we have had our own company value, that is offer good and suitable plywood machine to every our client forever, and help their business create much value.
Because we know this, so we insist make our machine well, from the beginning, choose machine material and spare parts, our experienced purchasing manager choose the better one through company different, then our designer will discuss and design machine, then our professional workers will start produce machine, each production step will be responsible by different workers.
the whole production line will be tested at least 5 times to make sure our machine in good conditions.
>Certification:
All our plywood machine have CE, and test report. FACTORY EXISTING SPARE PARTS:
whatever our sanding machine, or other plywood machinery, we all choose the good one, and after our designer finish the drawings, our workers will seriously and responsible treat each production step, different production steps will be responsible by different professional and experienced workers, make sure our machine quality is very good and stable. CLIENTS:
With our clients, we are not just partners, we are friends.
So, we will always think of the problem standing on your position, think how to help you save cost and create benefits.
We welcome you come to visit our factory and check machine by yourself, and produce machine according to your needs. DELIVERY:
Before loading, we will test machine and send you videos.
When loading, we will share loading pictures with you.
After ship leave, we will offer container and ship information to you, and prepare all documents for your custom clearance.
RELATED MACHINE:
RFQ:
> Production Time:
1 month after receive your deposit.
>Payment terms:
30% deposit, 70% before delivery.
100% L/C.
>Warranty:
2 years for main parts.
>MOQ:
1set
> Installation:
when machine reach your factory, our engineer go to install.
> After-sales service:
Any problem that your worker can not solve, we will reply you at the first time, help you solve it.
CONTACTS:
Plywood sanding is to use the sanding process to meet the error range of the process requirements for different thicknesses of the plywood after hot pressing by the hot press, and then use a fine abrasive belt to fine sand or polish the plywood to improve the surface finish of the plywood.
The hot-pressed plywood is composed of multiple layers of veneers. There may be deviations in the thickness of each layer of veneer. It may happen that the veneers that make up the slab are all positive tolerances, or the veneers that make up a board are all negative tolerances. After pressing, the thickness of the two sheets of plywood is very different. The key technology of the thickness-fixed sanding machine is to sand the two sides with equal thickness. It is easier to operate with a double-sided sanding machine, and it is easier to use a single-sided sanding machine to make both sides of the plywood, etc. Thickness is more difficult.
Whatsapp: +8618769900191 +8615589105786 +8615805493072
Email: minghungmachinery@gmail.com
Website: www.plywoodmachineline.com
