Sander for Calibrating and Polishing Plywood board
Hello, I am lucinda, the sales manager of SHANDONG MINGHUNG WOOD MACHINERY CO.,LTD, which manufacture plywood machine and veneer machine with many years experience and professional technicians.
our company culture is:Make Staff Happy, Customers Satisfied, and Gains Social Recognition.
the calibrating machine for plywood sanding, its mainly function is calibrating the plywood thickness, make thickness accurate and surface smooth. its working way are calibrating two sides of plywood at the same time, thus can improve work efficiency and production capacity.
Possible problems and how to solve them:
⒈The deviation of the abrasive belt is generally caused by improper adjustment. The normal abrasive belt swing should be 15-20mm in swing amplitude, 15-20 times per minute in swing frequency, moderate swing speed and consistent swing in and out speed. If it is in an abnormal state, over time, deviation may occur, especially if the speed of swinging in and out is inconsistent, it is more likely to cause abnormal shutdown; the photoelectric switch is damaged, the solenoid valve is damaged, and the swing cylinder is damaged. Poor dust collection and high dust concentration will affect the normal operation of the photoelectric cell and cause the belt to deviate; the damaged parts should be replaced in time to improve the dust removal effect.
2. Limit failure: There are limit switches on both sides of the abrasive belt. When the abrasive belt fails to swing and deviates to one side, touch the limit switch, the abrasive belt will loosen, and the main motor will stop automatically, which can effectively protect the abrasive belt. Once the limit fails, it can cause damage to the abrasive belt, sparks caused by rubbing the frame, and even cause a fire. Therefore, the limit switch should always check whether the action is reliable.
Details of 4feet Calibrating Machine
| Name | Plywood calibrating machine |
| Model | MH-BSG2313R-R-P |
| Sanding width | 40-1300mm |
| Sanding thickness | 5-100mm |
| Sanding length | >700mm |
| Main motor | 45kw, 30kw |
| Size | 3350*2900*3050mm |
| Weight | 9500KG |
if your plywood size are more bigger, like some clients' plywood width are 1700mm, do not worry, we can customize the plywood sanding machine as your conditions and requires.
Producing calibrating machine, require factory have advanced technology, experienced workers, and professional designer and technicians, because the plywood sanding machine has high requirements about the accuracy.
we have the ability and confidence that offer you high accurate plywood sanding machine.
except sanding machine, our factory produce the full sets of plywood machine, from the beginning processing log, to the end product-plywood. machine like the veneer peeling machine, veneer dryer machine, glue machine, cold press machine, hot press machine, plywood trimming machine, sanding machine, lift table.
if you are new for producing plywood, or you wants to enlarge your production capacity, we can help you through offer the good, suitable and strong plywood machine.
Delivery:
Our Clients:
Our CE certificate:
welcome contact us, we will reply quickly and offer you machine working video and details for you
