minghungmachinery@gmail.com   ▏ +86-18769900191 / +86-15589105786
Drying of Hardwood Veneers
You are here: Home » Veneer Drying Series » Veneer Roller Dryer » Drying of Hardwood Veneers

PRODUCT CATEGORY

Drying of Hardwood Veneers

Availability:
Quantity:
Drying of Hardwood Veneers
During the veneer drying process, a large amount of steam will be generated inside the dryer. If the steam cannot be discharged in time, it will affect the veneer drying efficiency and reduce the output of veneer drying.

MINGHUNG patented automatic control veneer drying moisture removal system, the whole The machine is controlled by computer PLC. According to the water vapor generated in the drying process of different veneers, automatic detection and automatic moisture removal are carried out.

There are a variety of sensing devices inside the veneer dryer, which convert the detection data into computer signals, and convert the computer signals into PLC signals. control.

The advantage of this design is precise moisture removal, automatic processing according to the dry humidity inside the veneer dryer, and avoiding the loss of energy inside the veneer dryer. Energy is saved and thermal efficiency is improved.

Drying of Hardwood Veneers


Beech veneer is light yellow, with clear texture and uniform texture. The density of beech is generally about 790kg/m³, and the hardness is about 5800N. The rear beech veneer has a smoother surface. Because it is cooking, the moisture content reaches %50-%60, and the moisture content is relatively high. If the moisture content of the veneer after drying reaches %0-%14, it takes about 10 minutes, so if the output of beech veneer drying is If there are requirements, special optimization of the dryer is required. MINGHUNG MH-RD2830L; MH-RD304HL These two models are veneer drying equipment optimized for beech veneer. For details, please contact us.

Veneer drying is very important for the production of plywood. After wood is produced into veneer through veneer lathe, the moisture content is 50-70%. Plywood production requires veneer moisture content of 8-%14. The moisture content of veneer is greater than %14, which brings negative The influences are:

1. It will increase the hot pressing time of the plywood blank in the hot press. The heating of the hot press is heated by a steam boiler or a heat transfer oil boiler. If the hot pressing time is increased, it is equivalent to an increase in heat loss.

2. If the moisture content is higher than %14, the veneer after glue spreading will seep out of glue during the hot pressing process, causing the plywood to crack.

3. If the moisture content of the veneer is 14%, the plywood blank needs to be dehumidified several times during the hot pressing process to remove the moisture inside the plywood blank. If the temperature is not properly controlled, there will be air bubbles in the semi-finished plywood, which will crack and cause the plywood to be scrapped.



MINGHUNG veneer drying effectively solves the problem of veneer drier, veneer drying, according to the density of different veneers, the customer's different veneer output, the factors of purchasing cost, MINGHUNG has developed a variety of veneer drying types MH-RD40L,MH-RD304HL / MH-2830L / MH-MD3618 : roller veneer dryer, wire veneer dryer, mesh veneer drier, press drying, square tube veneer drying, Hollow veneer drier, ect specialized in research on saving energy, energy consumption and improving production efficiency of veneer drying.
Drying of Hardwood Veneers
Drying of Hardwood Veneers
Drying of Hardwood Veneers
Drying of Hardwood Veneers

Veneer drying is a very important link in the production process of plywood. The moisture content of veneer is too high, or the moisture content of veneer is uneven, which directly affects the production quality of plywood. Usually, the moisture content of veneer is required to be %8-%14 , the moisture content of the veneer in this interval is the most reasonable for the quality of the plywood veneer, so a veneer dryer is required to complete the veneer drying. The selection of the veneer dryer needs to provide us with several data to ensure that we provide the best solution:

1. What is the thickness of the veneer?

2. What is the throughput for 10 hours?

3. What is the moisture content of the veneer?

4. The name of the tree for the veneer?

5. Is the heating boiler heat transfer oil or steam? Etc.,
MINGHUNG MH-304HL model dryer, providing energy-saving and efficient veneer drying solutions.
Drying of Hardwood Veneers
Drying of Hardwood Veneers
Drying of Hardwood Veneers
Drying of Hardwood Veneers
Drying of Hardwood Veneers

Veneer drying parts:
FAN:
We have professionally designed according to different types of dryers, positive pressure fans and negative pressure fans, different fans for different veneer drying equipment, energy-saving, high-efficiency design concepts provide an effective guarantee for improving the quality of veneer drying products .
Drying of Hardwood Veneers
Drying of Hardwood Veneers
Drying of Hardwood Veneers
Drying of Hardwood Veneers

MESH AND ROLLER:
Drying of Hardwood Veneers
Drying of Hardwood Veneers
Drying of Hardwood Veneers
Drying of Hardwood Veneers
HEAT CONDUCTION HEAT SINK:

Heat conduction heat sink, used for MINGHUNG veneer drying, the warp is made of aluminum, the characteristics of aluminum material is good heat conduction effect, low heat loss, can better improve heat conduction efficiency, internal design forced circulation, heat conduction effect is better than traditional heat dissipation Warp increased by %70. Greatly improved energy utilization.
Drying of Hardwood Veneers

Delivery:
Drying of Hardwood Veneers
Drying of Hardwood Veneers
Drying of Hardwood Veneers
Drying of Hardwood Veneers
Drying of Hardwood Veneers
Drying of Hardwood Veneers
Previous: 
Next: 
MINGHUNG core veneer dryer.jpg
Advantages of veneer dryer ?
08-13 2022

What is a veneer dryer?MINGHUNG Roller veneer dryer for drying original wood veneer, remove abundant humidity, in the end, the wood veneer humidity will be 5%-10%, so it is suitable for making plywood.Veneer roller dryer are suitable for big drying capacity per day, it can be different length, width

Read More
NeoImage_副本11_副本_副本.jpg
SHANDONG MINGHUNG WOOD MACHINERY FACTORY
08-05 2020

Shandong Minghung Wood Machinery Factory Shandong minghung wood machine factory produces plywood machinery in linyi city city, china, dedicated to providing high-quality and suitable machines veneer machine,plywood machine,veneer splicing machine.veneer dryer machine,veneer peeling machine,plywood v

Read More
MINGHUNG veneer wire dryer veneer dryer.jpg
veneer drying for plywood sheets
12-29 2022

Veneer drying for plywood sheets

Read More
Inverter for MINGHUNG machine.jpg
PLC control system design
12-24 2022

At this stage, user input devices (buttons, operation switches, limit switches, sensors, etc.), output devices (relays, contactors, signal indicators, etc.) and control objects driven by output devices (motors, solenoid valve, etc.).At the same time, it should also determine which signals need to be

Read More
Máquina de prensagem térmica de madeira compensada.jpg
Produção de madeira compensada - Máquina de prensagem térmica de madeira compensada da China
12-17 2022

Produção de madeira compensada - Máquina de prensagem térmica de madeira compensada da China

Read More
Chinês Torno laminador.jpg
Chinês Torno laminador para lâminas/ Chinese Roller Lathe
12-17 2022

Chinês Torno laminador para lâminas/ Chinese Roller Lathe, Somos fabricantes chineses de máquinas para compensado e laminadores, para nosso torno laminador, primeiro escolhemos usar materiais bons e grossos, para que nossos tornos sejam fortes e pesados;

Read More
heat transfer oil boiler.jpg
What Is Boiler
12-07 2022

A boiler is a thermal device that uses the heat energy released after fuel combustion or the waste heat in industrial production to transfer to the water in the container to make the water reach the required temperature (hot water) or steam at a certain pressure. It is a complete system consisting o

Read More
plywood sanding machine line.jpg
Plywood Sanding Calibration Machine-For Plywood Production
12-10 2022

Plywood Sanding Calibration Machine-For Plywood Production

Read More
plywood sanding.jpg
Analysis and solution of plywood sanding quality problems
12-02 2022

Sanding quality analysis of plywood(1)top and bottom are not parallel Reason:Feed roller bus bar unbalanced Irregular wear of feed rollersIrregular wear of the sanding rollerSolution: Adjust the position of the feed rollerGrinding feed rollerSanding roller(2)Horizontal slant, isometric traces R

Read More
Plywood turning machine.jpg
plywood turning machine
11-26 2022

Plywood turning machineThe plywood turning machine is mainly suitable for the sanding machine assembly line. This kind of sanding machine assembly line sanding machine is single-sided, that is to say, the sanding machine can only sand and polish one side of the plywood each time. After polishing, us

Read More
Shandong MINGHUNG Wood Machinery Co.,Ltd is one famous manufacturer of plywood machine in China, located in Linyi city. 

Home

CONTACT US

 +86-18769900191 /  +86-15589105786 
 +86-18769900191 / +86-15589105786
 
minghungmachinery@gmail.com
  Fangcheng Town,Lanshan District,Linyi City,Shandong Province,China
Copyright © 2010 SHANDONG MINGHUNG WOOD MACHINERY CO.,LTD