minghungmachinery@gmail.com   ▏           +8618769900191 / +8615589105786
Core Veneer Dryer Drying Machine for Plywood Production Line
You are here: Home » Veneer Drying Series » Veneer Roller Dryer » Core Veneer Dryer Drying Machine for Plywood Production Line

PRODUCT CATEGORY

Core Veneer Dryer Drying Machine for Plywood Production Line

Veneer drying
Veneer drying is very important for the production of plywood. After wood is produced into veneer through veneer lathe, the moisture content is 50-70%. Plywood production requires veneer moisture content of 8-%14. The moisture content of veneer is greater than %14, which brings negative The influences are: 1. It will increase the hot pressing time of the plywood blank in the hot press. The heating of the hot press is heated by a steam boiler or a heat transfer oil boiler. If the hot pressing time is increased, it is equivalent to an increase in heat loss. 2. If the moisture content is higher than %14, the veneer after glue spreading will seep out of glue during the hot pressing process, causing the plywood to crack. 3. If the moisture content of the veneer is 14%, the plywood blank needs to be dehumidified several times during the hot pressing process to remove the moisture inside the plywood blank. If the temperature is not properly controlled, there will be air bubbles in the semi-finished plywood, which will crack and cause the plywood to be scrapped.
MINGHUNG veneer drying effectively solves the problem of veneer drying, veneer drying, according to the density of different veneers, the customer's different veneer output, the factors of purchasing cost, MINGHUNG has developed a variety of veneer drying types MH-RD40L : roller veneer drying, wire veneer drying, mesh veneer drying, press drying, square tube veneer drying, Hollow veneer drying, ect specialized in research on saving energy, energy consumption and improving production efficiency of veneer drying.
Availability:
Quantity:
sharethis sharing button
  • MH-RD40L

  • MINGHUNG

  • Qingdao, China

  • 600sets/Year

  • L/C, T/T

  • 1 year

  • Veneer drying machine

Roller Veneer Dryer Machine for Plywood Production Line


Veneer drying  roller veneer drying 

Veneer drying is very important for the production of plywood. 

After wood is produced into veneer through veneer lathe, the moisture content is 50-70%. Plywood production requires veneer moisture content of 8-%14. The moisture content of veneer is greater than %14, which brings negative. 

The influences are: 1. It will increase the hot pressing time of the plywood blank in the hot press. The heating of the hot press is heated by a steam boiler or a heat transfer oil boiler. If the hot pressing time is increased, it is equivalent to an increase in heat loss. 2. If the moisture content is higher than %14, the veneer after glue spreading will seep out of glue during the hot pressing process, causing the plywood to crack. 3. If the moisture content of the veneer is 14%, the plywood blank needs to be dehumidified several times during the hot pressing process to remove the moisture inside the plywood blank. If the temperature is not properly controlled, there will be air bubbles in the semi-finished plywood, which will crack and cause the plywood to be scrapped.


4 decks veneer dryerMINGHUNG veneer drying effectively solves the problem of veneer drying, veneer drying, according to the density of different veneers, the customer's different veneer output, the factors of purchasing cost, MINGHUNG has developed a variety of veneer drying types MH-RD40L : roller veneer drying, wire veneer drying, mesh veneer drying, press drying, square tube veneer drying, Hollow veneer drying, ect specialized in research on saving energy, energy consumption and improving production efficiency of veneer drying.

The veneers move through the drying machine in several layers along rollers, as the machine's name indicates. The target moisture level after drying is around 6-7% which is precisely the right moisture level for gluing veneer.
A sufficient drying temperature is 145-160ºC and the veneers pass through the machine in about six minutes. Drying conditions and the moisture of the veneers are monitored continuously to make sure that the drying quality remains even.
Usually, the original moisture is 70-80%, after drying, the moisture is about 10%

MINGHUNG dryer

Veneer roller dryer +mesh dryer

drying machine

Veneer roller dryer

MINGHUNG Veneer drying machine for veneer drying

Veneer wire dryer

MINGHUNG VENEER DRYER FROM MINGHUNG MACHINERY

Veneer mesh dryer

veneer roller drying machine

4 decks Roller veneer dryer

veneer roller dryer

Veneer roller dryer 12+2 sections


>>>Parameters:

The dryer machine-Roller dryer, can be different layers, length and width, so we usually offer and produce according to your production capacity required.



Name Roller dryer
Model MH-RD
Heating mode Steam/Oil
Veneer thickness 1-3mm
Transport mode Roller press mode
Speed Speed adjustable
Number of layers 2 layers/3layers/4layers
Length of hot wind area 20m/26m/30m
Peoduction capacity 30-40m3/day, 60-70m3/day, 90-100m3/day



>>>Main Parts:

MINGHUNG Veneer drying roller

Rollers

fan

Fans

HEAT CONDUCTION HEAT SINK for veneer drying

Radiator

veneer dryer parts

Bearings

transmission system for veneer drying

Engines

minghung drying machine

Accessories



>>>Clients:

veneer dryer machineveneer drying machineminghung mesh wire dryerveneer latheveneer production line

With our clients, we not just partners, we are friends.
We will stand your position think about problem, consider how to save cost for you, and offer the better and suitable plywood machine to you.



>>>Delivery:
veneer roller dryingveneer dryingveneer roller drying deliveryveneer mesh veneer drying partsveneer drying loadingveneer drying deliveryWhen loading, we will share loading pictures to you.
After ship leave, we will offer you container and ship information.
Offer all documents for you do custom clearance.


>>>Factory:
kontrplak yapma makinesiShandong MINGHUNG Wood Machinery Co.,Ltd is one famous manufacturer of plywood machine in China, located in Linyi city. Our products have acquired EU CE, ISO 9001, ISO 14001, CCEP, and Energy Conservation Certification.

Our company integrates design, research and development, production and sales, and works closely with China's advanced scientific research institutions. We have a strong research and development team, at present, our machinery has won a number of national patents.
Pay more attention to machine details, details determine sucess or failure, so we continuous improve and optimize machines' performance, strictly control each production step, using advanced lathe processing machine, and through many times inspections, make sure our machine accurate and durable.

Scientific and technological innovation oriented, quality-based, service supremacy, we offer full complete range of plywood production solution and technology support for our customers. Yet our machines have been exported more than 30 countries and regions like Russia, Poland, Ukraine, Portugal, Bulgaria, Romania, Turkey, Egypt, Morocco, Indonesia, etc, and get good feedback.

Our main products include wood log debarker, veneer peeling machine, vacuum veneer stacker, veneer dryer machine, plywood cold press machine, plywood hot press machine, glue spreader, glue mixing machine, automatic plywood veneer paving line, sanding machine.

With high efficiency sales team offer 24 hours online service, the professional technical team and after-sales service team offer plant layout, machine drawings, and after-sales service.
Choose us, you need not worry anything, we will help you arrange all.

we will offer you the better and suitable machine, two years warranty, professional technical team at your service anytime. and hope that build a good and long-time cooperation.


>>>RFQ:

Production Time:
1 month after receive your deposit.
Payment Terms:
30% deposit, 70% before delivery.
100% Letter of Credit.
Warranty:
2 years for main parts.
MOQ:
1 set
Installation:
When machine reach your factory, our engineer can go to install
After-sales service:
Any problem that your worker can not solve, tell us, we will reply you at the first time,



>>> Contacts:


Whatsapp: ALI  : +8615589105786 

                 Mark: +8618769900191

                 Lucinda:  +8615805493072

Email: minghungmachinery@gmail.com

Previous: 
Next: 
Product Inquiry
auto plywood machine.jpg
The Ultimate Guide to Plywood Hot Press Machines: Crafting High-Quality Plywood
12-13 2023

The Ultimate Guide to Plywood Hot Press Machines: Crafting High-Quality Plywood Introduction:Plywood is a versatile and widely used material in various industries, from construction to furniture manufacturing. Behind the scenes, plywood hot press machines play a crucial role in the production proces

Read More
MINGHUNG core veneer dryer.jpg
Advantages of veneer dryer ?
08-13 2022

What is a veneer dryer?MINGHUNG Roller veneer dryer for drying original wood veneer, remove abundant humidity, in the end, the wood veneer humidity will be 5%-10%, so it is suitable for making plywood.Veneer roller dryer are suitable for big drying capacity per day, it can be different length, width

Read More
MINGHUNG MCHINERY.jpg
SHANDONG MINGHUNG WOOD MACHINERY FACTORY
08-05 2020

Shandong Minghung Wood Machinery Factory Shandong minghung wood machine factory produces plywood machinery in linyi city city, china, dedicated to providing high-quality and suitable machines veneer machine,plywood machine,veneer splicing machine.veneer dryer machine,veneer peeling machine,plywood v

Read More
plywood production line.jpg
plywood hot pressing process
05-27 2023

Whatsapp: +8618769900191 +8615589105786 +8615805493072Email: minghungmachinery@gmail.comWebsite: www.plywoodmachineline.com

Read More
1600ton Short cycle hot press line.jpg
The Art of Laminating Melamine Paper on MDF, Particle Board, And Plywood Using Short Cycle Hot Press Machines
02-24 2024

Mastering the Art of Laminating Melamine Paper on MDF, Particle Board, and Plywood Using Short Cycle Hot Press MachinesLaminating melamine paper onto MDF, particle board, and plywood is a crucial process that requires precision and efficiency. Short cycle hot press machines have revolutionized this

Read More
MINGHUNG Melamine Board Hot Press Machinery.jpg
2400T-2800T Melamine Short Cycle Hot Press
02-14 2024

2400T-2800T Melamine Short Cycle Hot Press

Read More
PB With Melamine Short Cycle Hot Press.jpg
Enhancing Efficiency and Quality with Particle Board Melamine Short Cycle Hot Press
02-14 2024

Enhancing Efficiency and Quality with Particle Board Melamine Short Cycle Hot Press

Read More
PB MDF With Melamine Short Cycle Hot Press Machine.jpg
Enhancing Efficiency and Quality with Melamine Short Cycle Hot Press in MDF Production
02-14 2024

Enhancing Efficiency and Quality with Melamine Short Cycle Hot Press in MDF Production

Read More
kurutma makinesi.jpg
Veneer Kurutma Makinesi: Kaplama Kurutma İşlemindeki Önemi
01-20 2024

Veneer Kurutma Makinesi: Kaplama Kurutma İşlemindeki ÖnemiAhşap işleme sektöründe, kaplama üretimi ve kontrplak üretimi için soyulmuş kaplamaların kurutulması oldukça önemlidir. Bu noktada, veneer kurutma makinesi devreye girer ve kaplamaların nemini alarak istenen kaliteyi sağlar. Veneer kurutma ma

Read More
High-tech enterprise certification certificate MINGHUNG.jpg
Minghung Machinery obtained China’s national high-tech enterprise certification
01-15 2024

The concept of high-tech enterprises: High-tech enterprises refer to enterprises that invest heavily in research and development during the production and operation process, have a high proportion of scientific and technological talents, and research, develop, produce and sell innovative products or

Read More
Shandong MINGHUNG Wood Machinery Co.,Ltd is one famous manufacturer of plywood machine in China, located in Linyi city. 
Home

PRODUCT GROUPS

CONTACT US

 +86-18769900191 /  +86-15589105786 
 +86-18769900191 / +86-15589105786
 
minghungmachinery@gmail.com
  Fangcheng Town,Lanshan District,Linyi City,Shandong Province,China
Copyright © 2010 SHANDONG MINGHUNG WOOD MACHINERY CO.,LTD