minghungmachinery@gmail.com   ▏           +8618769900191 / +8615589105786
Beech Veneer Drying Machine
You are here: Home » Veneer Drying Series » Veneer Roller Dryer » Beech Veneer Drying Machine

PRODUCT CATEGORY

Beech Veneer Drying Machine

Wire dryer includes many different parts, so the production technology and worker rich experience are important, and our factory with this advantage.
Availability:
Quantity:
sharethis sharing button
  • MH-RD40L、MH-RD304HL / MH-2830L / MH-MD3618

  • MINGHUNG

  • qingdao

  • TT L/C

  • Two years

Beech Veneer Drying Machine  


Beech Veneer Drying Machine

Beech veneer is light yellow, with clear texture and uniform texture. The density of beech is generally about 790kg/m³, and the hardness is about 5800N. The rear beech veneer has a smoother surface. Because it is cooking, the moisture content reaches %50-%60, and the moisture content is relatively high. If the moisture content of the veneer after drying reaches %0-%14, it takes about 10 minutes, so if the output of beech veneer drying is If there are requirements, special optimization of the dryer is required. MINGHUNG MH-RD2830L; MH-RD304HL These two models are veneer drying equipment optimized for beech veneer. For details, please contact us.

Veneer drying is very important for the production of plywood. After wood is produced into veneer through veneer lathe, the moisture content is 50-70%. Plywood production requires veneer moisture content of 8-%14. The moisture content of veneer is greater than %14, which brings negative The influences are:

1. It will increase the hot pressing time of the plywood blank in the hot press. The heating of the hot press is heated by a steam boiler or a heat transfer oil boiler. If the hot pressing time is increased, it is equivalent to an increase in heat loss.

2. If the moisture content is higher than %14, the veneer after glue spreading will seep out of glue during the hot pressing process, causing the plywood to crack.

3. If the moisture content of the veneer is 14%, the plywood blank needs to be dehumidified several times during the hot pressing process to remove the moisture inside the plywood blank. If the temperature is not properly controlled, there will be air bubbles in the semi-finished plywood, which will crack and cause the plywood to be scrapped.

MINGHUNG veneer dryerMINGHUNG veneer drying for plywood veneer sheets dryingplywood veneer dryerMINGHUNG veneer dryer machine (2)MINGHUNG veneer drying (2)MINGHUNG veneer drying
MINGHUNG veneer drying effectively solves the problem of veneer drier, veneer drying, according to the density of different veneers, the customer's different veneer output, the factors of purchasing cost, MINGHUNG has developed a variety of veneer drying types MH-RD40L,MH-RD304HL / MH-2830L / MH-MD3618  : roller veneer dryer, wire veneer dryer, mesh veneer drier, press drying, square tube veneer drying, Hollow veneer drier, ect specialized in research on saving energy, energy consumption and improving production efficiency of veneer drying.

Veneer drying is a very important link in the production process of plywood. The moisture content of veneer is too high, or the moisture content of veneer is uneven, which directly affects the production quality of plywood. Usually, the moisture content of veneer is required to be %8-%14 , the moisture content of the veneer in this interval is the most reasonable for the quality of the plywood veneer, so a veneer dryer is required to complete the veneer drying. The selection of the veneer dryer needs to provide us with several data to ensure that we provide the best solution:

1. What is the thickness of the veneer?

2. What is the throughput for 10 hours?

3. What is the moisture content of the veneer?

4. The name of the tree for the veneer?

5. Is the heating boiler heat transfer oil or steam? Etc.,
MINGHUNG MH-304HL model dryer, providing energy-saving and efficient veneer drying solutions.


Veneer drying parts:
FAN:
We have professionally designed according to different types of dryers, positive pressure fans and negative pressure fans, different fans for different veneer drying equipment, energy-saving, high-efficiency design concepts provide an effective guarantee for improving the quality of veneer drying products .
Beech Veneer Drying MachineBeech Veneer Drying MachineBeech Veneer Drying MachineBeech Veneer Drying Machine
MESH AND ROLLER:
Beech Veneer Drying MachineBeech Veneer Drying MachineBeech Veneer Drying MachineBeech Veneer Drying MachineHEAT CONDUCTION HEAT SINK:

Heat conduction heat sink, used for MINGHUNG veneer drying, the warp is made of aluminum, the characteristics of aluminum material is good heat conduction effect, low heat loss, can better improve heat conduction efficiency, internal design forced circulation, heat conduction effect is better than traditional heat dissipation Warp increased by %70. Greatly improved energy utilization.
Beech Veneer Drying Machine
Delivery:
Beech Veneer Drying MachineBeech Veneer Drying MachineBeech Veneer Drying MachineBeech Veneer Drying MachineBeech Veneer Drying MachineBeech Veneer Drying Machine

Previous: 
Next: 
Product Inquiry
auto plywood machine.jpg
The Ultimate Guide to Plywood Hot Press Machines: Crafting High-Quality Plywood
12-13 2023

The Ultimate Guide to Plywood Hot Press Machines: Crafting High-Quality Plywood Introduction:Plywood is a versatile and widely used material in various industries, from construction to furniture manufacturing. Behind the scenes, plywood hot press machines play a crucial role in the production proces

Read More
MINGHUNG core veneer dryer.jpg
Advantages of veneer dryer ?
08-13 2022

What is a veneer dryer?MINGHUNG Roller veneer dryer for drying original wood veneer, remove abundant humidity, in the end, the wood veneer humidity will be 5%-10%, so it is suitable for making plywood.Veneer roller dryer are suitable for big drying capacity per day, it can be different length, width

Read More
MINGHUNG MCHINERY.jpg
SHANDONG MINGHUNG WOOD MACHINERY FACTORY
08-05 2020

Shandong Minghung Wood Machinery Factory Shandong minghung wood machine factory produces plywood machinery in linyi city city, china, dedicated to providing high-quality and suitable machines veneer machine,plywood machine,veneer splicing machine.veneer dryer machine,veneer peeling machine,plywood v

Read More
plywood production line.jpg
plywood hot pressing process
05-27 2023

Whatsapp: +8618769900191 +8615589105786 +8615805493072Email: minghungmachinery@gmail.comWebsite: www.plywoodmachineline.com

Read More
4 layers Veneer roller dryer.jpg
Veneer Drying Machine -China Shandong MINGHUNG Machine
04-06 2024

Veneer Drying Machine -China Shandong MINGHUNG Machine Veneer roller dryer Convey wood veneer by rollers Veneer mesh dryer convey wood veneer by mesh belt Wood veneer dryers are mainly used to dry wood of various tree species, specifications, and uses.Most of the waste of wood veneer is due to the

Read More
Melamine hot press.jpg
How To Laminate Melamine on Mdf Chipboard by Hot Press Machine
03-30 2024

How To Laminate Melamine on Mdf Chipboard by Hot Press Machinemelamine press machineHow to Laminate Melamine on MDF board and Chipboard?Do you want to produce and make melamine laminated MDF? Melamine faced particle board? the panel thickness can be different like 12mm, 25mm or others Then one set g

Read More
auto loader for hot press machine.jpg
Automatic /Auto Loader And Unloader for Plywood Hot Press Machine From China SHANDONG MINGHUNG MACHINE
03-23 2024

Automatic /Auto Loader And Unloader for Plywood Hot Press Machine From China SHANDONG MINGHUNG MACHINEMINGHUNG Auto hot press machineIntroduction:The plywood manufacturing industry has witnessed significant advancements in recent years, with automation playing a crucial role in improving efficiency

Read More
veneer peeling line.jpg
China MINGHUNG Rotary Wood Veneer Lathe
03-09 2024

Rotary Wood Veneer LatheRotary cutting machines are used to process wood sections of a certain length and diameter into continuous veneer strips for the production of plywood, fine wood top boards and other artificial board veneers. The main technical parameters of the rotary cutting machine are the

Read More
Veneer dryer machine made in china.jpg
Veneer Machine Dryer
03-02 2024

veneer machine dryer

Read More
kurutma makinesi.jpg
Veneer Dryers
03-02 2024

Veneer DryersThe Inner Workings of Veneer Drying Machines: Unveiling the Art of Veneer DryingIntroduction:Veneer, a thin slice of wood used for various applications, undergoes a crucial drying process to enhance its stability and durability. Veneer drying machines play a pivotal role in this process

Read More
Shandong MINGHUNG Wood Machinery Co.,Ltd is one famous manufacturer of plywood machine in China, located in Linyi city. 
Home

PRODUCT GROUPS

CONTACT US

 +86-18769900191 /  +86-15589105786 
 +86-18769900191 / +86-15589105786
 
minghungmachinery@gmail.com
  Fangcheng Town,Lanshan District,Linyi City,Shandong Province,China
Copyright © 2010 SHANDONG MINGHUNG WOOD MACHINERY CO.,LTD