Views: 0 Author: SHANDONG MINGHUNG WOOD MACHINERY CO.,LTD Publish Time: 2022-12-02 Origin: MINGHUNG PLYWOOD MACHINE
Sanding quality analysis of plywood
(1)top and bottom are not parallel
Reason:
Feed roller bus bar unbalanced
Irregular wear of feed rollers
Irregular wear of the sanding roller
Solution:
Adjust the position of the feed roller
Grinding feed roller
Sanding roller
(2)Horizontal slant, isometric traces
Reason:
Bad belt link
Solution:
Replace the abrasive belt
(3)Plywood surface with burn marks
Reason:
belt overload
Solution:
Reduce the amount of sanding
Reduce the feeding speed
(4)curved stripes on plywood surface
Reason:
The belt surface is not clean
Bad belt seams
Abrasive Belt Sand Grains Are Defective
Solution:
Clean the belt surface
Replace the abrasive belt
Replace the abrasive belt
(5)Straight longitudinal grooves in the surface of the plywood
Reason:
There is damage on the smooth roller
Damaged sanding pad or foreign matter caught in the felt sponge
Insufficient sanding of plywood
There is foreign matter attached inside the sander
Solution:
Matte roller
Refining or cleaning the sanding pad
Adjust the working thickness or replace the abrasive belt with coarser grit
Remove the foreign matter inside the sander
more about plywood sanding machine contact us :
whatsapp: +8618769900191 +8615589105786 +8615805493072
website: www.plywoodmachineline.com
email: minghungmachinery@gmail.com



