minghungmachinery@gmail.com    ▏           +8618769900191 / +86 15589105786

Home

OSB PB MDF Machine Serise

Plywood Machine Series

Veneer Machine Serise

Veneer Drying Series

Continuous press production line parts

Contact Us

The step by step Manual for Plywood board production
You are here: Home » News » Plywood Machine News » The step by step Manual for Plywood board production

The step by step Manual for Plywood board production

Publish Time: 2023-07-15     Origin: SHANDONG MINGHUNG WOOD MACHINERY CO.,LTD

The step by step Manual for Plywood board production: Revealing the Machinery and Interaction


Presentation:

Plywood is a flexible and generally involved material in different businesses, including development, furniture assembling, and inside plan. Understanding the creation interaction and the equipment included is pivotal for anybody hoping to dig into the universe of plywood production. In this article, we will investigate the bit by bit course of plywood production process and the fundamental machines expected at each stage.


1. Log Choice and Debarking:

The most important phase in plywood production is the determination of appropriate logs. Excellent logs with straight grains and negligible deformities are liked. When chosen, the logs go through the debarking system, where the bark is eliminated utilizing particular apparatus. This step guarantees that the logs are spotless and prepared for additional handling.


2. Stripping and peeling:

Subsequent to debarking, the logs are taken care of into a stripping machine. This machine turns the logs while a sharp cutting edge strips off slim layers, known as facade, from the log's surface. The thickness of these facade relies upon the ideal pressed wood thickness. The stripped facade are then arranged in view of their quality and thickness.


3. Drying:

To improve the strength and solidness of plywood panel, the veneer or papel should go through a veneer dryer machine. Dampness content is diminished to a particular level utilizing drying machines or ovens. This step guarantees that the pressed wood doesn't twist or misshape after some time.


4. Sticking:

When the veneer are dried, they are prepared for the sticking system. Glue, commonly a phenol-formaldehyde pitch, is applied to each facade. The facade are then stacked together, with the grain course shifting back and forth between contiguous layers. This cross-grain game plan upgrades the strength and dependability of the last compressed wood item.


5. Squeezing -Pressing:

To bond the veneers together, the stacked layers go through squeezing. The veneer sheets stack is set in a water driven press, where intensity and strain are applied. This cycle guarantees serious areas of strength for a uniform connection between the facade. The term and strain applied during squeezing change contingent upon the ideal compressed wood thickness and type.


6. Managing and Sanding:

Subsequent to squeezing, the pressed wood sheets are managed to the ideal aspects. Abundance material is taken out, and the edges are gotten down to business. The sheets then, at that point, go through sanding to accomplish a smooth and uniform surface. Sanding machines outfitted with rough belts or sandpaper are utilized to eliminate any blemishes and make a predictable completion.


7. Wrapping up:

The last move toward plywood production is wrapping up. Contingent upon the planned use, the compressed wood might go through extra medicines, like finishing, painting, or covering with defensive specialists. These medicines improve the appearance, strength, and protection from dampness and other natural elements.


End:

Delivering great pressed wood includes a fastidious cycle and the usage of particular hardware at each stage. From log determination to getting done, each step assumes a significant part in making a strong and flexible material. By understanding the creation interaction and the hardware in question, one can see the value in the craftsmanship behind compressed wood and go with informed choices while utilizing or buying this adaptable material.



We are China manufacturer and factory who produce plywood equipment and veneer machine, if you are interested, welcome contact us

Contacts:

Mark: +8618769900191

Ali: +8615805496117

Lucinda: +8615805493072

Email: minghungmachinery@gmail.com






Shandong MINGHUNG Wood Machinery Co.,Ltd is one famous manufacturer of plywood machine in China, located in Linyi city. 

CONTACT US

 +86-18769900191 /  +86-15589105786 
 +86-18769900191 / +86-15589105786
 
minghungmachinery@gmail.com
 Zhutian Town, Feixian County,Linyi City,Shandong Province,China
Copyright © 2010 SHANDONG MINGHUNG WOOD MACHINERY CO.,LTD