Good Condition Excellent Material Automatic Particle Board Production Line for Chipboard
>>>>What is Chipboard making machine?
Particle board be made by wood, wood trunks, straw
The major advantage of selecting particle board is that it is a cost-effective option against plywood or medium density fiberboards. Laminated particle boards and veneered particle boards provide decorative looks in low price as compared to plywood.
It provides smooth and flat surface for sticking decorative laminates or wood veneer. This particle board is stronger and aesthetically attractive. Thus laminated particle board and veneered particle boards are now used in mass production of office furniture.
Due to its lightweight property, particle board can be easily transported and handled.
Particle board has more screw holding capacity as compared to MDF, so it is widely used to make furniture which can be assembled using screws.
It requires minimal maintenance and is easy to clean.
Particle boards have thermo-acoustic insulation properties, so they are very much useful in speakers and in false ceiling of auditoriums, theaters, etc.
It is an eco-friendly material as it uses wood waste such as wood chips, sawdust, wooden shavings, and bagasse which is residue of sugarcane after the juice is extracted.
>>>>So how to produce particleboard? what is its production step?
Preparing Stage:
1. DEBARKER:The logs typically retain outer bark and irregular surface layers. By using a debarker to remove the bark and irregularities from the surface of the logs, it enhances the efficiency and quality of subsequent processing.
2. CHIPPER&FLAKING: Used to chip wood into wood chips, usually using rotating cutting tools to chip wood into wood chips of a certain size.
3. DRYER: Remove moisture from wood chips or timber to ensure that the wood reaches the appropriate humidity and moisture content for subsequent mixing, forming, and hot pressing processes. | Mixing&Forming Stage: 4. GLUE MIXER: Equipment used to mix wood chips with adhesive and other additives uniformly, ensuring that the mixture has a certain uniformity and moisture content.
5. FORMING: Used to press the mixed wood chips and adhesive into a board shape, usually using continuous or batch forming machines for molding. |
| Trimming&Cutting Stages: 6. TRIMMING: Used to trim and edge the chipboard after hot pressing, to remove possible unevenness and excess adhesive, and to make the surface of the board flat.
7. CUTTING: Cuts the trimmed chipboard into the required sizes and specifications, usually with both cross-cutting and longitudinal cutting methods. | Post-processing Stage:
8. SANDING: By using sanding belts or sanding wheels to process the surface of the particleboard, it becomes smooth and uniform, thus improving the surface quality.
9. SIZING: If it is necessary to coat the surface of the chipboard with varnish or other coatings, a gluing machine may be used. |
>>>> Specification of the Full Particleboard Production Line
<1> Drum Chipper
| Inlet size | 240*750mm(H*W) |
| Blade quantity | 2pcs |
| Knife roll diameter | 800mm |
| Power | 132kw |
<2> Ring Chipper | Wood strands thickness | 0.4-1.0mm |
| Capacity | 5000-8000kg/h |
| Knife length | 449mm |
| Power | 250kw |
<3> Triple Pass Drying Machine
| Cpacity | 10000kg/h |
| Original moisture | ≤80% |
| End moisture | 2% |
| Power | 440kw |
<4> Vibrating screen | Screening cloth | 2 |
| Screening area | 12 m2 |
| Screening capacity | 70m3/h |
| Power | 11kw |
<5> Gluing
| Capacity | 500m3 /per day |
One set for spreading glue on surface strands
One set for spreading glue on core strands |
<6> Forming machine | Surface forming machine | 2 sets |
| Capacity | 2 *45m3/h |
| Core forming machine | 1 sets |
| Capacity | 65m3/h |
| Forming width | 1300mm |
| Forming thickness | 30-120mm |
<7> Continuous press
| Convey speed | 10-30m/min |
| Working height | 1250mm |
| Belt width | 1500mm |
| Power | 75kw |
<8> Hot press | Pressure | 1200 ton |
| Hot plate size | 2650*1680*120mm |
| Layers | 22 |
| Heating medium | Oil |
| Heating temperature | ≤180ºC |
| Closing time | 10s |
<9> Sanding machine
| Max sanding width | 1300mm |
| Sanding thickness | 3-50mm |
| Sanding belt size | 1350*2800mm |
Please note: each machine can be different specification according to different production capacity, panel size and other factors.
>>>>Loading Pictures of Our Particleboard Machine
>>>>Company Profile
We China manufacturer and supplier of Particle board making machine+ MDF board making machine +OSB board making machine. if you want to produce these board, we can offer you the full necessary production line.
With many years production experience, and adhere to continuous innovation and improvement, with specialized R&D center, obtained a number of research and development patents, with experienced technians and engineers, and professional sales team and after-sales team, We have beome one China's high-end Wood based panel machinery manufacturing enterprise.
According to your own conditions like the budget, factory room and other factors, we can offer you the suitable, good and high quality machine for help you produce good quality panel.
For us, we know clearly that only keep machine good quality, can let us develop longer and better. Therefore, we always keep to choose good material and parts to make our machine, and during the whole machine production process, be made by experienced workers, and through many times test and monitor, to make sure each production step is good, to make sure the whole machine is good
>>>>After Sale Service
<1> Machine Installation:
We can send engineers go to install machine, degue, and teach your workers
<2> Warranty:
1 year
<3> Factory layout:
After machine production start, we can make factory layout for you
<4> If meet problem when operation machine
Contact us at the first time, our engineers will help check and solve quickly.
Welcome contact us for more information if you are interested.