What types of plywood?
composite plywood
The core layer (or some specific layers) is composed of veneer or other materials than solid wood, and each side of the core layer has at least two layers of interlaced veneer blanks glued together.
symmetrical structure plywood
The veneers of the corresponding layers on both sides of the central layer correspond to the same plywood in terms of tree species, thickness, grain direction and physical and mechanical properties.
plywood for general use
plywood for specific use
Plywood with some special properties and suitable for special purposes. (Examples: marine plywood, flame retardant plywood, aviation plywood, etc.)
aviation plywood
Special plywood made of birch or other similar species of veneer and phenolic film paper. (Note: Mainly used in aircraft parts manufacturing)
marine plywood
It is a kind of high water-resistance special plywood formed by hot pressing and gluing the surface board impregnated with phenolic resin glue and the core board coated with phenolic resin glue. (Note: Mainly used in the manufacture of ship parts)
difficult-flammable plywood
Plywood and its surface decoration products whose combustion performance meets the requirements of Grade Β1 in GB 8624.
insect resistant plywood
Insect repellant is added to the veneer or adhesive, or the product is treated with insect repellant, and it has the function of preventing insects from invading special plywood.
preservative-treated plywood
Preservatives are added to the veneer or adhesive, or the product is treated with preservatives, special plywood with the function of preventing fungal discoloration and decay.
plybamboo
Plywood is made of bamboo as raw material and according to the principle of plywood composition. (Note: including bamboo plywood, bamboo strip plywood, bamboo plywood, bamboo curtain plywood, composite bamboo plywood, etc.)
strip plybamboo
Bamboo plywood is a bamboo plywood formed by sizing and gluing.
sliver plybamboo
Bamboo plywood is a bamboo plywood that is made of bamboo strips and is glued by sizing group blanks. (Note: Including bamboo woven plywood, bamboo curtain plywood and bamboo strips plywood, etc.)
woven mat plybamboo
Bamboo plywood is a bamboo plywood made by interlacing the bamboo strips into a bamboo mat, and then pressing it with a glue group.
curtain plybamboo
Bamboo plywood is a bamboo plywood made by weaving bamboo strips into bamboo curtains, and then glued by sizing group blanks.
composite plybamboo
Bamboo plywood is a bamboo plywood made by gluing different constituent units such as bamboo slices, bamboo strips, and bamboo veneers according to certain rules. )
wood-bamboo composite plywood
Plywood is a kind of plywood made of various sheet-like materials processed from bamboo and wood, and then pressed into blanks after sizing.
class Ⅰ plywood
Weather-resistant plywood for use in outdoor conditions, capable of passing the boil test.
class Ⅱ plywood
Water-resistant plywood that can pass the 63°C±3°C hot water immersion test for use in humid conditions.
class Ⅲ plywood
Moisture-resistant plywood that can pass the dry test and is intended for use in dry conditions.
interior type plywood
Plywood made of urea-formaldehyde resin glue or an adhesive with the same performance cannot withstand water immersion or high humidity for a long time, and is limited to indoor use.
exterior type plywood
Plywood made of phenolic resin glue or resin of equivalent performance as adhesive has the properties of weather resistance, water resistance and high humidity resistance, and is suitable for outdoor use.
structural plywood
Plywood can be used as a load-bearing structural member of a building.
plywood for concrete-form
Plywood that can be used as concrete forming moulds.
long-grain plywood
Plywood with the wood grain direction of the surface parallel or approximately parallel to the length of the board.
cross-grain plywood
Plywood with wood grain direction parallel or approximately parallel to the width of the board.
multi-plywood
Plywood made from five or more layers of veneer blanks.
moulded plywood
It is a non-planar plywood made of glue-coated veneers to form slabs according to certain requirements and hot-pressed in a mold of a specific shape.
scarf joint plywood
The end of the plywood in the direction of the grain is processed into an inclined plane, and the long plywood is lapped and connected by gluing.
finger joint plywood
The end of the plywood in the direction of the grain is processed into a finger-shaped tenon, and the long plywood is connected by gluing and finger-joining.
MINGHUNG MACHINERY MINGHUNG MACHINE
Shandong MINGHUNG Wood Machinery is one of the leaders of plywood machine in China, supplies a complete range of machinery, systems and technology for the production of plywood and veneer including wood debarker, veneer peeling machine, vacuum veneer stacker, knife grinder, veneer dryer machine, glue spreader, cold press, hot press machine, plywood saw machine, sanding machine.
Highly qualified personnel and competent management take all the advantages of production and continue developing day by day, the basis of our business is focus on our clients’ needs, such position allows us to build long-term partnership with our clients in China and abroad.
We also works closely with a global network of manufacturing partners in order of provide the reliable, good quality and service to our customers.
whatsapp: +8618769900191 +8615589105786 +8615805493072
website: www.plywoodmachineline.com
email: minghungmachinery@gmail.com