<1> The introduction of Veneer core sewing machine:
This core composer is high automatically, workers just put the veneer on the entrance, then it will automatically convey veneers, cutting veneer edge, and joint veneers and automatic stack plywood veneer.
In general, it is for standard plywood size 4*8feet, but if you produce other plywood size, we also can customize it for you.
Veneer composing machine
Core composer
Veneer sewing machine
Veneer jointing machine
Electric box of our core composer
Cutting knife of veneer composer
| Name | 4feet Core composing machine | 8feet Core composing machine |
| Suitable plywood size | 4*8feet | 8*4feet |
| Thickness | 1-3mm | 1-6mm |
| Number of glue thread | 5-7 rows | 13 rows |
| Feeding speed | 32m/min | 32m/min |
| Capacity | 240-300pcs/h | 240-300pcs/h |
| Power | 25kw | 39kw |
| Weight | 9000 kgs | 12000 kgs |
<2> Why choose us?
MINGHUNG veneer stacker
MINGHUNG veneer peeler
MINGHUNG veneer dryer
MINGHUNG hot press machine
MIINGHUNG veneer lathe
MINGHUNG film press
MINGHUNG plywood machinery
MINGHUNG veneer peeling machine
China factory and manufacturer of Woodworking plywood making machines and veneer production machine, from A to Z, from Raw materials to the end product, we can offer you all necessary machinery to you.
Veneer machine, Veneer dryer, Sawdust dryer, Veneer patcher, Veneer core composer, Glue mixer, Glue spreader, Cold press, Hot press, Film press, Short cycle melamine hot press, Plywood sizing and cutting machine, Sanding calibrating and polishing machine, Panel turnover, lift table, and so on.
At the beginning of our factory start, we first started from this veneer jointing machine, through these years improvement and abundant production experience, our veneer joint machine has been very mature and good.
And whatever its frame material, or kinds of spare parts, we use good and high level type, ensure the whole core composer is stable, strong and high quality.
Each machine can be produced as different requires.
<3> MINGHUNG plywood machine delivery pictures
Until now, whatever veneer lathe or plywood machinery, we have exported many to different countries, and got good feedback. That encourge us that continue to offer high quality machinery to each our clients.
For some machine, before loading, we will first asssembly and test for you, for example, the wood debarker, veneer lathe, veneer dryer.
Before loading, our engineers will check all again to ensure machine is good and in good conditions, then we will disassembly and packing by plastic film or wooden box, then loading machine for you.
<4> Related MINGHUNG plywood machine:
Glue spreading machine
For coating and spreading glue on wood veneer surface
Hot press machine
For pressing plywood into solid and strong piece
Plywood sizing machine
For trimming and cutting four edges of plywood, make each piece of plywood size be same and clean.
Welcome contact us for more information