LVL Plywood Production Line

LVL has a wide range of uses. It can be used not only in residential and commercial buildings, but also as vehicle materials, shipbuilding materials and sleepers. It can be widely used in various fields from load-bearing structures, non-load-bearing structures to furniture frames. When used in residential buildings, it can be widely used in houses, structural frames and floor systems. Due to its high strength-to-weight ratio, VL is especially suitable for large-span beams and some areas that cannot simply replace wood and steel. LVL not only retains the desirable natural properties of wood, but also has structural features not found in solid wood sawing villages, and its strength far exceeds that of steel roof trusses. In foreign countries, it is widely used in the roof truss structure of buildings, and can be used for paving floors, bowling lane boards, container bottom plates, railway sleepers, cement formwork, etc. In recent years, the demand for LVL in Japan and the Middle East has increased year by year. According to statistics, in 1998, the global LVL production was 2.3 million cubic meters. It is estimated that by 2002, the global consumption of LVL will reach 24 million cubic meters. At present, LVL is produced in North America, Japan, Finland, Australia, New Zealand and other countries. SHANDONG MINGHUNG WOOD MACHIERY CO.,LTD produces a complete set of equipment for the production of LVL plywood.

Due to the laminated structure of LVL plywood, the warpage and twisting deformation of the product are greatly reduced, so the stability of size and shape is good. It is necessary to use special LVL plywood production equipment. MINGHUNG's full set of plywood equipment has been used in experiments to solve the problems encountered in the production of poplar LVL plywood, pine LVL plywood, beech LVL plywood and birch LVL plywood.

LVL is available in various specifications and a wide range of thicknesses. Structural LVL thickness range is 5mm-150mm; width range is 100*1800mm; production range is 2500mm-25000mm. LVL plywood non-structural material usually has a thickness of 5-50mm, width 75-150mm; length 300-600mm; when the production of LVL plywood size is At 48 feet, the plywood factory can use most of the existing plywood machinery and plywood equipment, and invest a small amount of money to produce cost-effective and flexible size LVL plywood products. MINGHUNG plywood machine According to the problems encountered in the production process of LVL plywood, the traditional plywood machine is optimized to make it suitable for the transition from traditional plywood to Poplar Door Core LVL Lumber LVL Board LVL Beam Structural LVL plywood.

More about Lvl Plywood Machine Contact Us:

Whatsapp: +8618769900191    +8615589105786   +8615805493072

Email: minghungmachinery@gmail.com 

Website: www.plywoodmachineline.com