From Raw Materials To Finished Products: A Complete Solution for The MDF Making Machine

Keywords: #MDFproduction #MDFmachine #MDFproductionline

This article, will introduce How to make MDF(Medium Density Fiberboard).

Firstly, let us know clearly what is the MDF?

Secondly, What is the Application of MDF?

1. Furniture manufacturing: widely used in making cabinets, bookshelves, tables and bed frames, etc.

2. Interior decoration: used for decorative materials such as wall panels, ceilings and doors.

3. Construction industry: used as floor base, partition walls and templates, etc.

4. Crafts: suitable for making carvings, models and decorations.

5. Audio equipment: used for speakers and musical instruments due to its good acoustic properties.

Thirdly, What is the Advantages of MDF?

1. Smooth surface: easy to paint, veneer, suitable for fine processing.

2. Uniform structure: uniform density, consistent strength, not easy to deform.

3. Good processability: easy to cut, drill and carve, suitable for complex designs.

4. Environmental protection: can use wood waste and reduce resource waste.

5. Low cost: compared with solid wood, the price is more competitive

Now, we have know what is the MDF, but do you know what is the production step of MDF? Follow me

What is the Production step for making MDF?

The production process of MDF (Medium Density Fiberboard) includes raw material preparation, fiber preparation, drying, sizing, molding, hot pressing, cooling, trimming, sanding, testing, packaging, storage, environmental protection treatment and finished product delivery. Each link needs to be strictly controlled to ensure product quality.

Now let us see the specification MDF production step one by one:

1. Raw material preparation

- Wood selection: softwood or hardwood is usually used, such as pine, fir, eucalyptus, etc.

- Chipping: Chip the wood into small pieces for subsequent processing.

2. Fiber preparation

- Cooking: Wood chips are cooked and softened under high temperature and pressure.

- Fiber separation: Wood chips are separated into fibers by mechanical pulping.

3. Fiber drying

- Drying: The wet fiber is passed through a drying device to remove moisture to reach a humidity suitable for hot pressing.

4. Gluing

- Gluing: The dried fiber is mixed with resin glue, usually urea-formaldehyde resin or phenolic resin.

5. Molding

- Laying: The glued fiber is evenly laid on the molding belt to form a fiber mat.

- Pre-pressing: The fiber mat is initially compressed to reduce thickness and increase density.

6. Hot pressing

- Hot pressing: The fiber mat is pressed into a board under high temperature and high pressure, the resin is cured, and the fibers are tightly combined.

7. Cooling and trimming

- Cooling: The plate is cooled after hot pressing to stabilize the size.

- Trimming: The edge of the plate is trimmed according to the specifications.

8. Sanding

- Sanding: Sand the surface to ensure smoothness.

9. Quality inspection

- Inspection: Check the density, thickness, strength and other indicators to ensure compliance with the standards.

10. Packaging and storage

- Packaging: Pack qualified products to prevent damage.

- Storage: Store in a dry and ventilated place to avoid moisture and deformation.

11. Environmental protection treatment

- Waste gas treatment: Treat waste gas in production to reduce pollution.

- Wastewater treatment: Treat wastewater to ensure that emissions meet standards.

12. Finished product delivery

- Delivery: After passing the inspection, the finished product is shipped out of the factory for sale.

If you are interested to produce MDF, welcome contact us. we can offer you the suitable and good MDF making machines

Contacts:

Mark: +86 18769900191

Ali: +86 15805496117

Lucy: +86 18954906501

email: osbmdfmachinery@gmail.com