2400T-2800T Melamine Short Cycle Hot Press

Equipment advantages:

1. The steel used in the press is more evenly stressed after aging treatment, and the service life of the frame is 1.5-2 times that of ordinary machines.

2. Heightened frame, weekly press center distance, solves squatting phenomenon, CNC cutting, increases strength and fatigue wear resistance

3. The polymer internal temperature insulation board replaces the epoxy resin board, the pressure resistance and heat resistance index are significantly improved, and the service life of the cylinder sealing ring is extended.

4. Using a new air-cooled hydraulic pump station, the oil temperature is reduced by 10°C, the machine is more stable, and the high-pressure energy storage device improves the maximum total inflation time and improves the quality of the finished board.

5. Improve the synchronization mechanism and use a four-bar linkage mechanism instead of the gear synchronization mechanism. The synchronization effect is more stable, the flatness of the plate output is guaranteed, and the plate quality is high.

Double-sided sticker heat press is the mainstream product of our company. Widely used in laminating industries such as furniture panels, floors, cabinet panels, door panels, etc. It has the advantages of fast pressing speed, high efficiency and labor saving. The standard double veneer heat press is equipped with an automatic feeding trolley for convenient manual operation.

Our company has undergone more than ten years of improvement and research, and has upgraded and developed a new press based on the old press. It has the characteristics of longer life, easier operation, easier maintenance and more energy saving.