1400mm Double Sides Plywood Glue Spreader for Applied Glue on Wood Veneer
This product is 4feet double sides glue coating machine for coating glue on wood veneer surface, and worker lay them out and become plywood size.
Except 4feet size, there are 8feet size, or we can customize glue machine according to your own conditions and requires.
The four-roll gluing machine is to add an extruding roller beside the upper and lower gluing rollers to control the gluing amount on the upper and lower surfaces of the single board respectively. The linear speed of the extrusion roller is 15%~20% lower than that of the coating roller, which plays the role of scraping, and the gap between the extrusion roller and the coating roller is adjustable to ensure that the thickness of the upper and lower rubber layer is uniform. The upper and lower rubber rollers provide glue at the same time, non-interference, glue is not easy to produce beating, is a widely used glue equipment.
There are two kinds of arrangement for the extrusion roller of the four - roll applicator. 1) The upper and lower extruded rubber rollers are arranged on both sides of the rubber rollers respectively, and the rubber pump provides glue through the rubber hose respectively; 2) The upper and lower extruding rollers are located at the feeding side of the rubber applicator. The upper rubber applicator is supplied by the rubber pump, and the lower rubber applicator is supplied by the lower rubber groove. Due to the different arrangement of the roller and the way to supply glue, its role is also different. The former coating uniform, can save glue material; The latter applies when productivity is relatively high.
folding
>>>>GLUE SPREADER MACHINE:
| Product name | glue spreader |
| Sides | Double sides at the same time |
| Size | 4feet or customize |
| Diameter of coating roller | φ245mm |
| Line speed | 20-30m/min |
| Installed capacity | 3kw |
| Transmission way | gear &chain transmission |
| Size | 2250*1250*1700mm |
>>>>Glue Machine 3D drawing show:
>>>>DELIVERY:
>>>>ABOUT US:
We-Shandong MINGHUNG Wood Machinery is one of the leaders of plywood machine in China, we mainly specialize in manufacturing the full line of plywood equipment. supplies a complete range of machinery, systems and technology for the production of plywood and veneer including wood debarker, veneer peeling machine, vacuum veneer stacker, knife grinder, veneer dryer machine, glue spreader, cold press, hot press machine, plywood saw machine, sanding machine.
Highly qualified personnel and competent management take all the advantages of production and continue developing day by day, the basis of our business is focus on our clients' needs, such position allows us to build long-term partnership with our clients in China and abroad.
We also works closely with a global network of manufacturing partners in order of provide the reliable, good quality and service to our customers.
>>>>RELATED MACHINE:
>>>>RFQ:
